Favero Assioma PRO MX-2

Favero Assioma PRO MX-2 — Dual-sided SPD power meter pedals for MTB and gravel

The Assioma PRO MX-2 are the first fully SPD®-compatible MTB pedals with dual-sided power measurement. A sensor in each pedal, ±1% accuracy, a replaceable 6061-T6 aluminium body and all electronics housed inside the spindle: real power data on the roughest terrain, with no external pod exposed to impacts.

True dual-sided measurement

Each pedal has its own sensor, so left/right balance is measured rather than doubled. IAV Power with a 3-axis gyroscope reads instantaneous angular velocity and holds ±1% accuracy even under very irregular pedalling — surges, technical climbs, oval chainrings.

Built for MTB and gravel

6061-T6 aluminium body, chromoly clipping mechanism (up to 800 HV hardness) and optimised mud shedding. Rated for category 3 bicycle use: demanding terrain, drops up to 61 cm. IP67 waterproofing means jet washing is no problem.

Battery and charging

Up to 160 hours per charge. Both pedals charge simultaneously through magnetic connectors and a Y cable, and 15 minutes of charging gives 15 hours of riding. The lithium-ion battery is sealed inside the spindle — no batteries to replace.

Replaceable body, modular spindle

The pedal body can be swapped in the workshop, so wear or an impact never writes off the sensor. The PRO spindle is shared with the road versions (RL / RS): change the body and the same sensor moves from MTB to road.

Connectivity

Simultaneous ANT+ and Bluetooth Low Energy (up to 3 BLE connections). Works with Garmin, Wahoo, Hammerhead, Bryton, Sigma, smartwatches, Zwift, TrainerRoad, Strava and the Favero Assioma app for setup and firmware updates.

Technical specifications

• Type: MTB / gravel pedals with dual-sided power meter
• Cleat compatibility: 100% SPD® (Favero SPD cleats included)
• Accuracy: ±1% (IAV Power system)
• Weight: 199 g per pedal with sensor
• Stack height: 11.2 mm (17.2 mm including Shimano cleat)
• Pedal body: 6061-T6 aluminium, replaceable
• Clipping mechanism: chromoly, hardness up to 800 HV
• Waterproofing: IP67
• Usage category: category 3 (drops up to 61 cm)
• Battery: rechargeable lithium-ion sealed in the spindle
• Battery life: up to 160 h — 15 min fast charge = 15 h riding
• Charging: magnetic connectors, Y cable (both pedals at once)
• Integrated 3-axis gyroscope and cadence sensor
• Connectivity: ANT+ and Bluetooth Low Energy (up to 3 simultaneous BLE)
• Compatible with round and oval chainrings, all cranks and guards
• Auto-calibration and Active Temperature Compensation (ATC)
• Data: power, cadence, L/R balance, PCO, power phase, rider position
• Modular design: PRO spindle shared between road (RL/RS) and MTB (MX)
• Warranty: 2 years — made in Italy
• Manufacturer reference: 773-10-02

In the box

• Pair of Assioma PRO MX-2 pedals (left + right sensors)
• Favero SPD® cleats with screws and washers
• Two magnetic connectors and one Y charging cable
• Two greasing kits
• Warranty and safety manual, welcome booklet

Ideal for mountain bikers, gravel and cross-country riders who want dependable power data on rough terrain, anyone committed to SPD cleats, and riders who alternate between MTB and road on a single power meter.

Available in store and to order. Our mechanics handle fitting, pairing with your head unit and first calibration in our Liège and Brussels workshops.